ATV320 2.2KW TRI
Variable speed drive, ATV320, 2.2 kW, 380…500 V, 3 phases, compact
Marque : Schneider Electric
Add to wishlist
Connectez-vous pour voir les prix- Description
- Size Guide
- Avis (0)
Description
| range of product |
Altivar Machine ATV320
|
|
|---|---|---|
| product or component type |
Variable speed drive
|
|
| product specific application |
Complex machines
2.2 kW for heavy duty
|
|
| variant |
Standard version
With disconnect switch |
|
| mounting mode |
Internal mounting
|
|
| communication port protocol |
Modbus serial
CANopen |
|
| [Us] rated supply voltage |
380…500 V – 15…10 %
|
|
| EMC filter |
Class C2 EMC filter integrated
|
| analogue input type |
AI1 voltage: 0…10 V DC, impedance: 30000 Ohm, resolution 10 bits
AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30000 Ohm, resolution 10 bits AI3 current: 0…20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits |
|
|---|---|---|
| [Us] rated supply voltage |
Relay output R1 on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1 on resistive load, cos phi = 1: 4 A at 30 V DC Relay output R1, R2 on inductive load, cos phi = 0.4: 2 A at 250 V AC Relay output R1, R2 on inductive load, cos phi = 0.4: 2 A at 30 V DC Relay output R2 on resistive load, cos phi = 1: 5 A at 250 V AC Relay output R2 on resistive load, cos phi = 1: 5 A at 30 V DC Fan: 74.0 W at 380 V, switching frequency 4 kHz
|
|
| terminal identifier |
Relay output R1, R2: 5 mA at 24 V DC
2 ms (AI1, AI2, AI3) – analog input
2 ms (AQ1) – analog output |
|
| method of access |
Slave CANopen
|
|
| 4 quadrant operation possible |
True
|
|
| asynchronous motor control profile |
Voltage/frequency ratio, 5 points
Flux vector control without sensor, standard Voltage/frequency ratio – Energy Saving, quadratic U/f Flux vector control without sensor – Energy Saving Voltage/frequency ratio, 2 points |
|
| synchronous motor control profile |
Vector control without sensor
|
|
| maximum output frequency |
0.599 kHz
|
|
| condition of use |
170…200 % of nominal motor torque
|
|
| acceleration and deceleration ramps |
Linear
U S CUS Ramp switching Acceleration/deceleration ramp adaptation Acceleration/deceleration automatic stop with DC injection |
|
| motor slip compensation |
Automatic whatever the load
Adjustable 0…300 % Not available in voltage/frequency ratio (2 or 5 points) |
|
| switching frequency |
2…16 kHz adjustable
4…16 kHz with derating factor |
|
| nominal switching frequency |
4 kHz
|
|
| braking to standstill |
By DC injection
|
|
| brake chopper integrated |
True
|
|
| maximum input current |
8.7 A
|
|
| maximum output voltage |
500 V
|
|
| product specific application |
5.7 kVA at 500 V (heavy duty)
|
|
| network frequency |
50…60 Hz
|
|
| with safety function Safely Limited Speed (SLS) |
True
|
|
| with safety function Safe brake management (SBC/SBT) |
False
|
|
| with safety function Safe Operating Stop (SOS) |
False
|
|
| with safety function Safe Position (SP) |
False
|
|
| with safety function Safe programmable logic |
False
|
|
| with safety function Safe Speed Monitor (SSM) |
False
|
|
| with safety function Safe Stop 1 (SS1) |
True
|
|
| with sft fct Safe Stop 2 (SS2) |
False
|
|
| with safety function Safe torque off (STO) |
True
|
|
| with safety function Safely Limited Position (SLP) |
False
|
|
| with safety function Safe Direction (SDI) |
False
|
|
| protection type |
Input phase breaks: drive
Overcurrent between output phases and earth: drive Overheating protection: drive Short-circuit between motor phases: drive Thermal protection: drive |
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
Avis
Il n’y a pas encore d’avis.